"high temperature fans and blowers"

Carbon Steel High Wear Resistance Power Plant Fan High Volume Introduction This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering the fan. Detail introduction The fan system running at normal temperature with an impeller diameter

Product Description: With a pressure range of 2000-10000Pa, this industrial centrifugal fan is capable of handling even the most demanding workloads. It is available in a range of power options, from 5.5KW to 200KW, making it suitable for a wide range of industries and applications. The Centrifugal Flow Fan is constructed from high-quality materials to ensure durability and long-lasting performance. The main body is made from carbon steel, while other options include Q235 or

Product Description: 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. It is widely used in industrial applications such as sintering systems, large-scale dust

Single Inlet Efficient Energy-Saving Sintering Machine Centrifugal Flow Fan Introduction The Single Inlet Efficient Energy-Saving Sintering Machine Centrifugal Flow Fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the

Single Suction High Volume Industrial Forced Draught Boiler Fan Introduction The Single Suction High Volume Industrial Boiler Forced Draught Boiler Fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area.The fan system running at normal

Q235 Single Inlet Antiwear Industrial Boiler ID Centrifugal Boiler Fan Introduction The Q235 Single Inlet Antiwear Industrial Boiler ID Centrifugal Boiler Fan ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of

V-Belt Driving Smelting Furnace Material Handling Centrifugal Fan Introduction The V-Belt Driving Smelting Furnace Material Handling Centrifugal Fan is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800

Industrial Boiler Waste Gas Desulfurization Heavy Duty Centrifugal Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media below 150 °C for a long

Carbon Steel High Air Flow Coal-Fired Boiler Dust Collector Fan Introduction The Carbon Steel High Air Flow Coal-Fired Boiler Dust Collector Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The Carbon Steel High Air Flow Coal-Fired Boiler Dust Collector Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan can output higher gas pressure, and can provide more gas