"high pressure industrial air blower"

Industrial Backward Curved Air Supply Biomass Boiler Centrifugal Fan Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. The fans are divided into general

V-Belt Driving Medium Pressure Explosionproof Centrifugal Flow Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The impeller is annealed to completely

Heavy Duty Antiwear Industrial Boiler Induced Draft Centrifugal Fan Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the

Stainless Steel Double Inlet Industrial Material Handling Blower Fan Introduction The 7-08 series medium pressure centrifugal fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. It’s a widely used medium-pressure heavy-duty

Aluminium Alloyed Energy Efficiency Smelting Furnace Centrifugal Flow Fan Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.

Stainless Steel Large Capacity Mineral Powder Sintering Centrifugal Flow Fan The 7-08.26 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. This series

AC Motor Long Lifetime Power Plant Fan High Volume Smoke Exhaust Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Detail

Heavy Duty Anti-Explosion Lime Kiln Boiler Fan High Temperature Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. Detail introduction

Low Pressure Heavy Duty Centrifugal Fans Gas Delivery Backward Introduction The 4-10 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. The fan adopts advanced technology. The design of backward curved centrifugal wheel is optimized by means of CFD hydro-field simulating. The design is more accordant with the aerodynamic characteristics, high efficiency, and stable airflow. Detail introduction There exists a maximum